Changing Strings on an Acoustic Guitar

What You'll Need:

Once the string has been completely slackened, uncoil it from the keys at the head of the guitar.Commonly, bridge pins will provide some resistance when trying to remove them. Next, remove the other end of the string from the brigde,using plas .Lay the guitar on flat surface,for example table, but the floor works in a pinch. Now,it's time to add new string. Put the end of the string in the bridge's pin hole, after that put the pin over it. Take other end of string and attach to the tuning pegs or keys,now tune it to the appropriate note with the help of tuner. If you're unsure of which direction to turn the tuner to slacken the string, pluck the string before you begin turning the tuner. The pitch of the note should get lower as you slacken the string.

Many guitarists in the world remove all the strings at once and then replace it. I not advised this process. The six tuned strings of a guitar produce a great deal of tension on the neck of the instrument, which is a good thing. Removing all strings at once changes this tension, which many guitar necks don't react well to. Sometimes, when all six strings are replaced, the strings will sit impossibly high off the fretboard. Change your strings one at a time to avoid a variety of issues.